Blacksmith power hammer is widely used for forging works like drawing-out, upsetting, punching, chiseling, forging, welding, bending and twisting in wrought iron industry. And we need heat these raw materials before processing them into different shapes.
Our Ellsen blacksmiths power hammer is made of high quality material, so it is sold very well at home and abroad. Besides, we produce different sizes of power hammers according to clients’ requirements. And their working capacity is ranging from 180T/Min to 260T/Min.
Attack Energy: 180J
Work Sector Altitude: 180mm
Attack Number of Times: 260T/Min
Malleable Side Steel Length of Side: 20x20mm
Malleable Round Steel Length of Side: 22mm
Uses for Parts the Power: 1.5kw/220v/1ph, 1.5kw/380v/1ph
Electric Rotational Speed: 1440r/p/m
Anvil Weight: –
G.W.: 240kg
Size: 584x390x952mm
Weight of falling parts: 16kg
Max.hit energy: 0.18KJ
Height of working area: 180mm
Hit number: 258/min
Dimension of top and bottom die surface(L×W): 70×40mm
Max.square steel can be forged: 20×20mm
Max.round steel can be forged(Diameter): ф22
Rate Power: 1.5KW/220V, 1.5KW/380V
Speeds of motor: 1440r.p.m
Weight of base plate: 40kg
Total weight: 290kg
Overall demensions(L×W×H): 800×420×1170
Attack Energy: 220J
Work Sector Altitude: 200mm
Attack Number of Times: 255T/Min
Malleable Side Steel Length of Side: 30x30mm
Malleable Round Steel Length of Side: 35mm
Uses for Parts the Power: 2.2kw/220v/1ph, 2.2kw/380v/1ph
Electric Rotational Speed: 1440r/p/m
Anvil Weight: 200kg
G.W.: 500kg
Size: 670x369x1050mm
Attack Energy: 270J
Work Sector Altitude: 240mm
Attack Number of Times: 250T/Min
Malleable Side Steel Length of Side: 40x40mm
Malleable Round Steel Length of Side: 45mm
Uses for Parts the Power: 2.2kw
Electric Rotational Speed: 1440r/p/m
Anvil Weight: –
G.W.: 250kg
Size: 800x410x1213mm
Attack Energy: 530J
Work Sector Altitude: 245mm
Attack Number of Times: 250T/Min
Malleable Side Steel Length of Side: 52x52mm
Malleable Round Steel Length of Side: 68mm
Uses for Parts the Power: 4kw
Electric Rotational Speed: 1440r/p/m
Anvil Weight: 400kg
G.W.: 1350kg
Size: 1080x600x1389mm
Attack Energy: 1000J
Work Sector Altitude: 300mm
Attack Number of Times: 210T/Min
Malleable Side Steel Length of Side: 65x65mm
Malleable Round Steel Length of Side: 85mm
Uses for Parts the Power: 7.5kw
Electric Rotational Speed: 1440r/p/m
Anvil Weight: 850kg
G.W.: 2800kg
Size: 1600x950x1950mm
Attack Energy: 2500J
Work Sector Altitude: 370mm
Attack Number of Times: 180T/Min
Malleable Side Steel Length of Side: 130x130mm
Malleable Round Steel Length of Side: 145mm
Uses for Parts the Power: 15kw
Electric Rotational Speed: 1470r/p/m
Anvil Weight: 1800kg
G.W.: 5060kg
Size: 2080x1240x2350mm
In order to improve our power hammer quality, we pay much attention to the hammerhead because it has a great effect on the whole quality. Many power hammers have a very short service life due to the poor quality of hammerhead. However, our Ellsen overcomes this problem and produce it with high quality raw material-18CrMnTi steel. This kind of material has the features of high temperature wearing resistance, high impact toughness and corrosion resistance. Thus ensures our power hammers have excellent quality.
Pneumatic power hammer mainly consist of machine frame, transmission, compression cylinder, working cylinder, compression piston, falling part, air supply device and the anvil etc.
Machine Frame
The machine frame is the main body of blacksmith air hammers. There have motor, gear, working and operation device. These parts are combined as a whole of the main body.
Transmission Mechanism
The transmission mechanism of our air power hammers includes a gearbox, crankshaft and connecting rod system. It changes the rotating motion of the motor into the movement up and down of the compression piston.
Compression Cylinder and Working Cylinder
The upper and lower parts as well as spin valves of compression cylinder and working cylinder valve are interconnected to produce compressed air that drives the cylinder move up and down.
Falling Part
This part of our blacksmith power hammer consists of working piston, hammer stem and the anvil, etc.
Air Supply Device
Air supply device of our forging hammer is composed of spin valves on the upper and lower airway, operating handle or foot pedal. Thought these components, we could do various actions.
Anvil Block
The anvil block of our power hammers are mounted with anvil cushion and anvil cap in order to meet the stability for forging.
When you are engaged in forging work, a blacksmith air hammer will be an essential tool to help you finish your work perfectly. Also, it is very important to choose a right air hammer. Here are some points we must figure out when purchasing blacksmith air hammer for sale:
The buyer should know which size power hammer is suitable for their business. If you buy a power hammer whose work capacity is beyond what you need in practice, it will waste your money and time.
Our clients could arrange their own shipping agent to transport the mechanical forging hammers. If they don’t have, our company would delivery it by our agent for less charge. And we would sendthe pneumatic forging hammer to customers’ destination on time.
For installation, our company would dispatch our skillful engineers to assist the customers at home and abroad if necessary.